Maxeon SunPower Reserve RESERVE-INV-1-P5-L1-INT Guía De Instalación Rápida página 2

SunPower Reserve
Home energy storage system
NEED MORE HELP?
If you would like to contact us directly, please visit our off cial website:
https://sunpower.maxeon.com
for more information .
1.0 Product Overview
(1)
(1) Grid connector
(2)
(2) Backup connector
(3)
(3) Grounding point
(4)
(4) BAT + connector / BAT - connector
(5)
(5) Battery circuit breaker
(6) PV connectors
(6)
(7) PV switch
(8) Communication ports
(3)
(9) Wi-Fi port
(10) LED display
2.0 Confi rmation of Accessories and Tools
2.1 Scope of Delivery
Inverter (RESERVE-INV-1-P5-L1-INT)
Inverter (x1) Side Cover (x1) Cable cover (x1)
(
( × 2)
Screws and
Backup Connector
AUX Connector (x1) Grounding
(x1)
Terminals Set (x1)
Grounding Cable Parallel Battery Parallel Battery
between Inverter and Communication Positive Power Cable*
1st Battery (x1) Cable* (x1) (x1)
Communication
Power Cable between Grounding Cable
Cable between
two Column Series between two Column
two Column Series
Batteries** (x1) Series Batteries** (x1)
Batteries** (x1)
* Only suitable for RESERVE-BAT-1-DC-10 .1-INT
** Only suitable for RESERVE-BAT-1-DC-4-INT
If you install the energy storage system in only one column for the fi rst time, please keep the rest cables properly which are used to connect with the second column series battery RESERVE-BAT-1-DC-
4-INT .
4 .
1
2
3
5 .
4.0 Electrical Connections
Electric Shock Hazard:
Before doing any electrical connection, ensure the PV switch, A, C and BAT circuit breaker are switched OFF and
cannot be reactivated .
DANGER
You must protect each inverter with an individual grid and backup circuit breaker in order to ensure that the
inverter can be disconnected safety .
DANGER
Selecting a circuit breaker and conductor cross-section
The maximum allowable grid circuit breaker specification is 50 A when the copper conductor cross-section for grid
connection is 10 mm² and factors influencing the ampacity of the cable, other influences on dimensioning must be
considered. You may use SunPower One installer dashboard to adjust the grid circuit breaker specification from 32
DANGER
A to 40 A, otherwise the circuit breaker may trip under normal operation conditions .
4.1 Grounding Connection
Additional grounding
point
T20x150mm
2 .5Nm
8-10mm
Grounding point for
battery
6-10mm²
Quick Installation Guide
(RESERVE-INV-1-P5-L1-INT)
548268 Revision D - March 2024
(10)
(9)
(8)
PV MC4 connector
Inverter base (x1)
pair (X2)
× 16)
Grid CT (x1) PV CT (x1)
Parallel Battery Series Battery Main
Negative Power Positive Power
Cable* (x1) Cable** (x1)
Quick Installation System Wiring
Guide (x1) Diagram (x1)
4 5
SW8
6 .0Nm
6 .
T20x150mm
2 .5Nm
2.2 (Optional) Accessories for Wall Mounting
Wall Bracket (x1)
2.3 Installation Tools
T20x150mm
Torx Screwdriver
Terminal Crimper
3.0 Installing the Inverter
3.1 Before installing the inverter ensure that the battery has been installed properly. For
more details refer to Battery Quick Installation Guide, Safety & Installation Instructions.
3.2 Installing the Inverter Standing on the Battery
1 . Installing the inventer base
T20x150mm
2 .5Nm
Grid connector (x1)
1
5
6
4
WiFi Module (x1)
3.3 (Optional) Installing the Inverter with Wall Bracket
Series Battery Main
Negative Power
Cable** (x1)
1 .
4.2 AC Connection
Description
Grid side
Backup side
* The cable cross section is recommended. For specific details, please refer to local wiring rules.
4.2.1 Grid Connection
1 .
PE
L N
5mm
16mm
45mm
6-10 mm²
ø12-18mm
4.2.2 Backup Connection
1 .
4.2.3 Disassembling the AC Plug Connector
Disassembling the Grid Plug Connector
2 .5mm
Left Connecting Right Connecting
Screw M5*12 (x12)
Beam (x1) Beam (x1)
Blade width: 2.5mm SW8
Flat-head
Spirit Level Socket Wrench
Screwdriver
Crimping Pliers Measuring Tape Hammer Drill, bit φ10
2 . Lock right screws
T20x150mm
2 .0Nm
8
3
10
9
7
2
2 .
T20x150mm
2 .0Nm
Circuit Breaker Specification
32/40/50 A
32A
1 2
2 .
4
3
3 .
2 .
10mm 3mm
4-6 mm²
L
N
PE
33mm
1
2
Wall Anchor (x4) Small Spirit Level (x1)
Wire Stripper Network Plug Clamp
Multimeter Current Clamp
3 . Lock left screws
T20x150mm
2 .0Nm
Lock
right
Lock
screw
left
screw
11
12
3 .
T20x150mm
2 .0Nm
Recommended cable cross section*
6~10mm²
4~6mm²
4 .
2
1
3
AF3
2±0 .2Nm
AF2
3 .
1 .2±0 .1Nm
PE
N
L
2
1
English
2