VONROC HT504AC Traducción Del Manual Original página 6

EN
• Before using any power tool, check first for
damaged parts and if found do not use it before
the part or parts have been replaced with new
ones.
• If the power supply cord is damaged, it must
be replaced only by the manufacturer or by an
authorized service center to avoid risk.
• Do not use power tools when you are tired or
have been drinking alcohol.
• Do not force the appliance - let it work at the
rate for which it was intended.
• Do not overreach while working - you may lose
your balance.
• Never use this appliance without the blade
guard fitted. It must always remain fitted.
• Only use spare parts and attachments supplied
by VONROC. Use of attachments other than
those supplied or recommended by VONROC
will invalidate your guarantee and could be
dangerous.
• Only use this appliance for its intended purpose
trimming hedges and bushes.
• Check the hedges and bushes for foreign ob-
jects, e.g. wire fences and hidden wiring.
• Use a residual current device with a tripping
current of 30 mA or less.
• Hold the hedge trimmer with both hands if two
handles are provided.
• The hedge trimmer is intended to be used by
the operator at ground level and not on ladders
or any other unstable support.
• Before operating the hedge trimmer, the user
should make sure the locking device(s) of any
moving elements (e.g. the extended shaft and pi-
voting element), if any, are in the locked position.
Above all be carefull!
Danger!
a) Keep all parts of the body away from the blade.
Do not remove cut material or hold material to
be cut when blades are moving. Blades continue
to move after the switch is turned off. A moment
of inattention while operating the hedge trimmer
may result in serious personal injury.
b) Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate any
power switch. Proper carrying of the hedge trim-
mer will decrease the risk of inadvertent starting
and resultant personal injury from the blades.
6
c) When transporting or storing the hedge trimmer,
always fit the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal
injury from the blades.
d) When clearing jammed material or servicing the
unit, make sure all power switches are off and the
power cord is disconnected. Unexpected actua-
tion of the hedge trimmer while clearing jammed
material or servicing may result in serious perso-
nal injury.
e) Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord. Blades contacting
a "live" wire may make exposed metal parts of the
hedge trimmer "live" and could give the operator
an electric shock.
f) Keep all power cords and cables away from cut­
ting area. Power cords or cables may be hidden in
hedges or bushes and can be accidentally cut by
the blade.
g) Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
h) Inspect and maintain the trimmer regularly. Have
the trimmer repaired only by an authorised repai-
rer.
i) Keep your hands and feet away from the cutting
area at all times.
j) Always hold the trimmer at a safe distance from
the body.
k) Always wear protective goggles.
l) Always wear gloves.
m) Only use the trimmer in daylight.
n) Ensure the ventilation openings are clear of
debris at all times.
o) Ensure there are no people of animals within 5
metres of your trimming area.
2. MACHINE INFORMATION
Intended use
This hedge trimmer is only intended for cutting
branches from shrubs, bushes, ornamental plants
and hedges.
TECHNICAL SPECIFICATIONS
Model No.
Rated voltage
Rated Power
No load speed
Cutting length
HT504AC
230V~ 50Hz
550W
1.700/min.
510mm
WWW.VONROC.COM