LF Origin 21 LWS18AT Instrucciones De Montaje página 6

ASSEMBLY INSTRUCTIONS
1.1 Remove the plastic caps from the hanger bolts on the
feet (B and C).
1.2 Inserting the hanger bolts on the feet (B and C) through
the drilled holes on the corner block and fit the flat washers
(CC), lock washers (BB) and hex nuts (AA) onto each hanger
bolt. Securely tighten the nuts with the provided open wrench.
Hardware Used
Hex Nut
AA
5/16" Lock Washer
BB
CC Flat Washer
2.1 Ask for assistance to lift the unit upright.
2.2 Open the drawer and install one handle (DD) to the
front side of the drawer with two 28mm bolts (EE).
Hardware Used
DD
Handle
EE
M4 x 28mm Bolt
3. Repeat the same process to install one handle (DD) to
the front side of each door.
Hardware Used
DD Handle
EE
M4 x 28mm Bolt
1
C
x 8
x 8
A
x 8
2
x 1
x 2
3
x 2
x 4
6
B
C
BB
AA
A
EE
A
EE
CC
DD
DD