ICS Schneider Messtechnik GD-20 Manual página 49

5. Commissioning, operation
®
5.4 Modbus start-up kit
The gas density sensor, with the optionally available start-up kit (order no. 14075896), can be configured for operation
at the measuring location.
A further function is an integrated data logger, showing measured data in a specific cycle or writing it in a file.
The start-up kit consists of:
■
Power supply unit
Interface converter (RS-485 to USB)
■
USB cable type A to type B
■
■
Sensor cable with M12 x 1 connector
■
Adapter cable for GDM-100-TI
■
®
Modbus tool
5.4.1 Establish connection to the computer
Interface converter
USB
RS-485
+
Voltage supply
-
®
5.4.2 Modbus tool
The software can be downloaded free of charge from the WIKA homepage: https://de-de.wika.de/download_software_
gas_density_sensors_de_de.WIKA
After wiring and installing the software of the interface converter or copying the Modbus
can be started.
WIKA operating instructions gas density sensor, model GD-20
®
tool software, the program
EN
49