Bestron COPPER Serie Manual De Instrucciones página 14

DESCRIPTION
The device is intended for domestic purposes only, not for professional use.
The description below corresponds to the image on page 2.
1. Motor housing
2. On/Off Button
3. Release Button
4. Speed buttons + and -
5. Turbo button
6. Whisks, for beating/mixing egg whites, whipped cream, mayonnaise, pudding, puree and light doughs.
7. Dough hooks, for mixing heavier dough types such as bread dough.
8. Digital display
USE - Installing accessories
1. Make sure the plug is removed from the socket.
2. Press the attachments into the openings on the bottom of the appliance until they click into place.
USE - stirring and mixing
1. Plug it into the socket. The display now lights up and will blink. "0" indicates the speed setting while
"0:00" indicates the operating time.
2. Turn on the device with the "on" button. The display now stops blinking.
3. Start stirring or mixing at the lowest speed by pressing the "+" speed button. The speed can be
increased by pressing the speed button "+" again. The highest speed is setting 6. By pressing the
speed button "-" you decrease the speed. The timer will start counting once the device starts and will
continue counting as long as the device is mixing or stirring.
4. During stirring or mixing you can temporarily increase the speed by pressing the turbo button. The
speed then switches to a higher speed. However, we recommend that you only use this setting for a
short time (maximum 30 seconds for heavy preparations).
The mixer may be switched on continuously for a maximum of 5 minutes. When the operating time
reaches 5 minutes, the appliance will stop running automatically. You must then let the device cool
down for 20 minutes.
5. To reset the timer, press the "on" button to put in on standby mode. Then press it again to operate the
device.
6. Switch the device off after use by pressing the "on" button. Then remove the plug from the socket.
Attention:
Switch off the appliance and unplug it before installing or changing accessories.
USE - Removing accessories
1. Make sure the plug is unplugged.
2. Now press the release button firmly while holding the attachments.
CLEANING AND MAINTENANCE
1. Remove the plug from the socket.
2. Remove the accessories and clean them in soapy water or in the dishwasher. Then dry thoroughly.
3. Clean the motor housing of the device with a damp cloth. Then dry thoroughly.
4. Store the device.
Attention:
• Clean the accessories after each use.
• Do not use aggressive or abrasive cleaning agents or sharp objects such as knives.
• Never immerse the motor housing in water or any other liquid.
14
EN