Lighting Settings - ULTIMEA THOR T60 TRIPLE LASER TV Manual Del Usuario

3.2.4 Dolby Vision Adjustment
a. Make sure the source supports Dolby Vision before using the function;
b. Press the remote control "Setting" key -> select "Projector settings" ->
select "Dolby Vision";
c. Select the screen size to match your screen. If there is no exact match,
select the closest size；
d. Enter the "Gain" page and select a number. The numbers are Dolby
Vision enhancement levels. It is recommended to try different levels to
match the current source.
Fig. 16 Dolby Vision Adjustment
3.2.5 Eye Protection Mode
a. Press the remote control "Setting" key -> select "Projector
settings" -> select "Eye Protection Mode";
b. Press the "OK" to turn on Eye Protection Mode.
Fig. 17 Eye Protection Mode

3.2.6 Lighting Settings

a. Press the remote control "Setting" key -> select "
Projector settings" -> select "Lighting Settings";
b. There are three modes for selection: "Hight Light",
"Standard", "Energy Saving".
Fig. 18 Lightning Settings
EN
12