Algam Lighting EVENT PAR Manual Del Usuario página 22

IR REMOTE CONTROLLER
1
2
3
4
5
BUTTON FONCTION
Automatic mode will enable you to run the automatic programs on the product. Press
1 AUTO remote controller, display shows CC10. Press
programm. Press
It is a remote switch , Press
2 BLACK OUT
viously saved mode. Press
Press
3 STROBE
Press
4 % Press
Press
5 0-9
6 SPEED No function
Sound-Active mode will enable the product to respond to the music. Press
7 SOUND controller. Press
Press
To adjust sound sensitivity for in Sound-Active mode, press
8 SENSITIVITY
or
It is a color gradient mode. Press
9 FADE
Fade mode. Press
10 MANUAL No function
11
Press
decrease brightnes.
to turn off the auto mode.
to turn on the auto strobe effect.
or to either increase or decrease the speed of the program.
to exit the remote control and enter to A001 mode.
button select the static colors , there are 32 static colors for selectable.
- : Fixed static colors , please
and then press
return the last modes.
to either increase or decrease the sound sensitivity.
or to either increase or decrease the speed of the program.
to choose your wanted colour. Press
or to either increase or decrease the speed of
one time , it will open the IR remote model, also will enter to the pre-
again to exit the remote control function and save the current settings.
- digital button to choose your wanted color.
or to either increase or decrease the sound sensitivity.
on the remote controller, then Press
P.22
6
7
8
9
10
on the
on the remote
on the remote controller. Press
again to turn off the
or to either increase or