Airzone Aidoo Pro AZAI6WSP Serie Guia De Inicio Rapido página 16

Advanced settings
INFORMATION AVAILABLE ON AIRZONE CLOUD
EN
Device information
Alias. Allows you to assign an alias to identify each device.
Name.* Displays the name of the device.
MAC. Displays the MAC address of the device.
Firmware. Displays the webserver version of the device.
Wi-Fi. Displays the network linked to the device.
IP address.* Displays the IP address of the device.
Network settings.* Displays the advanced configuration options for the linked network.
Integration.* Displays the integrations available through the Webserver and allows you to make
the following configurations depending on the integration selected:
Local:
•
Local API. Enables the option of integration with third parties via Local API.
•
Venstar. Enables local integration with Venstar thermostats.
•
ecobee SB. Allows the device to be associated to an ecobee thermostat connected in
the same local network by means of the following credentials: Client ID, Client key and
associated thermostat ID in ecobee SmartBuildings.
•
Pelican. Allows the device to be associated to a Pelican thermostat connected in the
same local network by means of the following credentials: URL, email, and password of
the account with which you are registered in Pelican, and serial number of the associated
Pelican thermostat.
•
BACnet IP Airzone. Configures the integration port for communications using the BACnet
IP protocol and allows editing of the BACnet ID and BACnet port.
•
mDNS. Enables the mDNS service for device discovery within a local network.
•
Modbus TCP Airzone. Configures the integration port for communications using the
Modbus TCP/IP protocol.
Integration port:
•
Modbus RTU Aidoo. Configures the integration port for communications using the Modbus
RTU protocol and allows editing of the Modbus ID and selection of communication speed.
•
BACnet MS/TP Aidoo. Configures the integration port for communications using the
BACnet MS/TP protocol and allows editing of the MAC address, BACnet ID, communication
speed, maximum number of master nodes, and maximum number of frames.
•
AirQ. Allows activation of the air quality control/metering devices AirQ Box and AirQ Sensor
•
Lutron Palladiom. Enables indoor unit control via a Lutron Palladiom thermostat.
•
Airzone Thermostat. Allows control of the indoor unit through a wired Airzone Blueface
thermostat.
Note: this option is only available for selected Aidoo PRO devices for direct expansion AC
units. For more information, please refer to your device's data sheet.
* Only available in Bluetooth configuration.
16
To perform advanced
configuration of the device,
download the Airzone Cloud
app.
To access the
advanced settings
follow the steps described
in the Airzone Cloud
support section.