Descargar Imprimir esta página

JBM 52980 Instrucciones De Montaje página 14

Maquina limpiadora de piezas
Ocultar thumbs Ver también para 52980:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
Approved cleaning solutions water/household detergents (ph6-b).
The pump of your parts washer may be damaged if you use solvents other than those
listed above such as methyl ethyl ketone (MEK), perchloroethylene or trichloroethylene.
The only trouble you should ever experience with your parts washer is reduced volume
flow or no flow of cleaning liquid from the flex hose nozzle. The probable cause is
foreign matter in the flex hose.
1. Check that indicator light on switch box is lit.
2. Using an insulated handle screw driver to lightly touch tip of housing of motor. A
light oscillation magnetic pull indicates power is reaching the motor.
3. Disconnect power plug, remove flex hose from pump flow - out line.
4. Remove front of pump housing by removing 3 screws. Clear any foreign matter lodged
around impeller.
5. Resemble in reverse order.
CLEANING SOLUTIONS
WARNING
TROUBLE SHOOTING
CORRECTIVE PROCEDURE

Publicidad

loading