GB
INTRODUCTION
Thank you for purchasing this Geha quality product. Please read this user ma-
nual carefully before operating the device. In particular, please mind the safety
instructions, as failure to observe may increase the risk of injury!
SYMBOLS
The device may not be operated by children!
• The cutting unit inside may cause injuries.
Do not touch the cutting unit!
• The cutting unit inside may cause injuries.
Keep all clothing away from the feed slot!
• The cutting unit inside may cause injuries.
Keep hair away from the feed slot!
• The cutting unit inside may cause injuries.
Do not spray flammable gas into the device!
• Caution, there is a risk of fire hazard.
IMPORTANT SAFETY NOTES
Please read the instruction manual completely and carefully before operating the document shredder.
In order to prevent any risk of injury, it is important to take basic safety precautions when using an
electric device. Always comply with the following basic safety precautions:
Your safety is important to us. Please read the instruction manual carefully before attempting
to operate the device. Save these instructions for future reference.
1.
KEEP CHILDREN AND ANIMALS AWAY FROM THE DEVICE TO AVOID THE RISK OF SERIOUS INJURY
2.
Please read the instruction manual completely and carefully before operating the shredder.
3.
Always follow all warnings and instructions outlined in the manual, on the shredder and shredder packaging.
4.
Keep clothing, jewellery, hair, etc. away from the machine to ensure personal safety.
Serious injuries could occur.
5.
Please do not shred paper clips, adhesive paper, adhesive tapes or cloth. Doing so will damage the cutting
system or decrease the shredding performance.
6.
This shredder is made for short-time operation. For a long operational life span of the machine as well as a
good functioning, note that there is a maximum shredding capacity for this device, meaning that only a cer-
tain amount of paper and only one CD/DVD or credit card can be shredded at the same time. After continuous
shredding for 10 minutes, it must be cooled down to room temperature before continuing to shred.
Cycle time: 10 minutes on, 30-40 minutes off.
7.
Do not place the device near heat sources or in a humid environment for an extended period of time.
10
All manuals and user guides at all-guides.com