Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
― ―
1
2
3
5
5
6
4
The remote control can be used within five metres from the front of the device. Make sure that the
remote control points to the sensor under the control panel.
1
Press this button to turn on/off oscillation
2
Press this button to turn the unit on/off.
3
Press this to cycle through fan, night and natural modes.
4
Press this button when the unit is on to set a turn-off timer from 1h-7h. Press this button
when the unit is off to set a turn-on timer from 1h-7h.
5
-/+
Press '+' to increase the fan speed. Press '-' to decrease the fan speed.
6
Press this button to activate the humidification mode.
NOTE: Two AAA batteries are included.
10 of 124 | English
AAA Battery, 1.5v
Battery
OPERATING INSTRUCTIONS
― ―
Power button
Press once on the control panel or remote control to turn the device on or off.
Oscillation Button
Press once on the control panel or remote control to start or stop vent oscillation.
Operating Modes
Press the
Mode Button to select from the below three modes.
Fan Mode
Produces steady wind with three-speed settings. Adjust speed using the
button or remote '±' buttons. Note: no lights will light up above the icon on the control
panel when this mode is in effect.
Natural Mode
Auto-cycles through two speeds to mimic natural airflow.
Sleep Mode
This auto-cycles through fan speeds for a quiet and restful sleep.
Two settings:
• Setting 1: Fan operates at speed 2 for 30 mins, then fan speed 1 continuously.
• Setting 2: Fan operates at speed 3 for 30 mins, fan speed 2 for 30 mins, then fan
speed 1 continuously.
Choose your desired setting by pressing the
or the '±' buttons on the remote control. Setting 1 will be shown by the fan speed 1 icon
lighting up, and setting 2 will be shown by the fan speed 2 icon lighting up.
Humidification
Humidification Mode can be activated in any of the modes above. When activated,
the device will evaporate water from the water tank; reducing the temperature of the
Mode
air to create a more refreshing experience in hot dry conditions. For an even cooler
experience, add the ice packs (included) to the water tank.
•
Before activating this mode, ensure there is sufficient water in the water tank as
per the instructions in the 'FILLING THE WATER TANK' section.
•
Press the humidification button on the control panel or remote control to activate
this mode.
•
When there is insufficient water in the tank, the humidification icon on the control
panel will flash and a beep will sound.
Timer Function
In any mode you can schedule automatic on/off using the Timer Button on either the
control panel or remote.
To set a turn-on timer:
1. Plug in and turn on the power socket.
2. Press the timer button and choose a 1-7 hour delay for the appliance to
automatically power on.
3. The control panel displays your selected timer duration for 1 minute, and then the
display lights will turn off.
4. To cancel the turn-on timer, press the power or timer buttons on the remote or
control panel until no timer lights show.
To set a turn-off timer:
1. Ensure the appliance is plugged in and the power socket is turned on.
2. Power on the appliance.
3. Press the timer button and select a 1-7 hour delay for the appliance to
automatically power off.
4. The control panel displays your selected timer duration for 1 minute, and then the
display lights will turn off.
5. To cancel the turn-off timer, press the power or timer buttons on the remote or
control panel until no timer lights show.
fan speed
fan speed button on the control panel
English | 11 of 124
Publicidad
