Publicidad
Idiomas disponibles
Idiomas disponibles
Clean the exterior surface of the appliance by wiping
•
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
Always empty the water tank, clean and dry the
•
appliance when not in use to prevent mould.
Be aware that high humidity levels may encourage the
•
growth of biological organisms in the environment.
Do not permit the area around the appliance to become
•
damp or wet. If dampness occurs, turn the output of the
appliance down. If the appliance output volume cannot
be turned down, use the appliance intermittently. Do not
allow absorbent materials, such as carpeting, curtains,
drapes, or tablecloths, to become damp.
Unplug the appliance during filling and cleaning.
•
Never leave water in the water tank when the appliance
•
is not in use.
Empty and clean the appliance before storage. Clean the
•
appliance before next use.
Cleaning the water tank:
Remove and empty the water tank as per the instructions
•
above.
Clean the water tank with warm tap water and mild
•
detergent (e.g. washing up liquid). Note: Do not use boiling
water to clean the water tank.
Ensure to remove any scale or deposits that have formed
•
inside the water tank.
Wipe all surfaces dry before placing the water tank back
•
into the appliance.
Cleaning the honeycomb filter:
1. Locate the Air Cooler's filter panel on the back of the unit.
2. Carefully unscrew the filter panel using an appropriate
screwdriver.
3. Once the panel is removed, you will have access to the
filter inside.
4. To clean the filter, follow these steps:
14 of 124 | English
a. Gently detach the filter casing from the rear of the unit.
b. Take out the honeycomb evaporative filter positioned
in front of the air filter casing.
c. Utilize a firm brush and/or a vacuum cleaner
to thoroughly clean the air filter, removing any
accumulated dust or debris.
d. For additional sanitation, place the filters outside
under direct sunlight to help eliminate any remaining
bacteria.
5. After cleaning, reassemble the air filter and honeycomb
filter casing.
6. Carefully place the entire casing back into its original
position on the rear of the unit.
7. Ensure that all screws are securely fastened to prevent
any loose components. Note: While performing these
steps, exercise caution and avoid tampering with the
product or any of its components to prevent damage.
Storage:
To store your product, we recommend using the original
•
or a similar-sized box.
Store the appliance in a safe, clean and dry place, away
•
from direct sunlight and out of reach of children when
not in use.
English | 15 of 124
Publicidad
