Publicidad
Idiomas disponibles
Idiomas disponibles
Reverse door
English
1. Remove the upper right hinge cover and the hinge gap cover. Disconnect the switch (electrical con-
nection) from the upper right hinge cover.
2. Remove the upper right hinge
3. Lift the refrigerator door upward by holding it halfway up until it disengages from the product body.
4. Remove the middle hinge by unscrewing the screws. Once unscrewed, remove the intermediate hinge
and lift the freezer door up until it disengages from the lower hinge.
5. Remove the bottom hinge, rotate it 180° and replace it on the other side, together with the adjustable
feet.
6. Slide the lower hinge shaft from the right hinge hole to the left.
7. Remove the right pin and locking device from the bottom of the refrigerator and freezer door. Then
screw the left pin and locking device (found in the plastic bag with the instruction manual) into the left
side of the refrigerator and freezer door (if the door is closed).
8. Mount the freezer door on the bottom hinge in the correct position. Once the door is mounted, attach
the hinge and intermediate hinge shaft to the freezer door and product body with a screwdriver.
9. Hook the refrigerator door with the intermediate hinge shaft and assemble the upper hinge to the re-
frigerator door and attach it to the product body with a screwdriver.
10. Attach the door switch to the upper hinge cover. Attach the left hinge cover and secure it with the
screws. Attach the hinge hole plug and secure it with the screws.
infiniton.es
34
Publicidad
