Buffalo 600 Serie Manual De Instrucciones página 7

Thermal Cut-out Reset
The appliance is fitted with a Thermal Cut-Out safety switch. Should the temperature exceed safe levels
the appliance will automatically cut off power.
The thermal Cut-out switch is located on the left rear of the oven. To reset the appliance after a sufficient
cool-down period:
1. Unscrew the reset switch cover.
2. Press the small reset switch down until it clicks, using a blunt pointed instrument.
3. The appliance is now reset and can be used as normal.
Cleaning, Care & Maintenance
The appliance should be cleaned after each day's operation; however it may require
cleaning more often, depending on the frequency of usage.
Failure to clean the appliance regularly may cause frequent malfunctions.
Do not use any abrasive cleaning agents on the appliance.
1. Switch off the power and disconnect from the power supply.
2. Empty the oven chamber and allow the appliance to cool before cleaning.
3. The control panel cannot be immersed in water, but can be wiped down with a damp cloth.
4. Use a suitable detergent to clean the oven chamber. Let it dry well, ensuring no moisture enters the
inside of the appliance.
5. The main body can also be cleaned with warm soapy water.
6. After cleaning as above, please use a dry cloth to clean the appliance to ensure there is no water on
the heating element and control panel.
Clean removable parts
• Use warm, soapy water and a soft brush to clean the shelves.
• Dry thoroughly.
Technical Specifications
Note: Due to our continuing program of research and development, the specifications herein may be
subject to change without notice.
Model Voltage
CU470
230V 1N~,
50-60Hz
CU470-E
Model Plug type
CU470 N.A.
CU470-E
CEE 7/7
CU470_ML_A5_v2_20240202.indb 7 CU470_ML_A5_v2_20240202.indb 7
Power Temperature
(Max.) Range
3000W 50ºC - 250ºC
Dimensions
Capacity
h x w x d (mm)
Max. 3 x GN1/1 pan 610 x 600 x 550
EN
Net
Weight
32kg
7
2024/2/2 14:12 2024/2/2 14:12