GoodHome GHLAC09-MK Manual Del Usuario página 10

Plug replacement
This appliance is supplied with a BS1363 3 pin plug fitted with a
10 Amp fuse. Should the fuse require replacement, it must be
replaced with a fuse rated at 10 Amp and approved to BS1362.
In the event the mains plug has to be removed/replaced for any
reason, please note:
IMPORTANT: THE WIRES IN THE MAINS LEAD
ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE
Blue – Neutral
Brown – Live
Green/Yellow – Earth
As the colours of the wires in
the mains lead of this appliance
may not correspond with the
coloured markings identifying
the terminals in your plug, proceed as follows.
• The blue wire must be connected to the terminal marked with an
N or coloured black.
• The brown wire must be connected to the terminal marked with
an L or coloured red.
• The green/yellow wire must be connected to the earthing terminal
which is marked with an E or with the earth symbol.
WARNING NEVER CONNECT LIVE OR NEUTRAL
WIRES TO THE EARTH TERMINAL OF THE PLUG.
Note: If a moulded plug is fitted and has to be removed take
great care in disposing of the plug and severed cable. It must be
destroyed to prevent from engaging into a socket.
IMPORTANT: WAIT 3 MINUTES BEFORE
RESUMING OPERATION.
After the unit has stopped, it cannot be restarted for 3 minutes.
Operation will automatically restart after 3 minutes.
5059340831558_MNL_IN_V04.indd 10 5059340831558_MNL_IN_V04.indd 10
Green / Yellow - Earth
BLUE Neutral
Cord Clamp
10
BROWN Live
FUSE 10 Amps
08-12-2023 12:10:22 08-12-2023 12:10:22