Klarstein GARFIELD XL Manual Del Usuario página 32

EN
32
How to turn the door
Tools needed: Phillips screwdriver, flathead screwdriver, putty knife, 5/16 inch
socket wrench, masking tape.
The following parts are used when turning the door:
No. Part
1 Upper hinge
2 Hinge cover
3 Self-tapping locking screw
4 Hole cap
5 Pin
6 Lower hinge assembly
7 Adjustable foot
8 Threaded bolt
Pc. Please note:
Pre-installed in the freezer, also
1
used when the door is rotated
Pre-installed in the freezer, also
1
used when the door is rotated
Pre-installed in the freezer, also
5
used when the door is rotated
Pre-installed in the freezer, also
1
used when the door is rotated
Pre-installed in the freezer, also
2
used when the door is rotated
Pre-installed in the freezer, also
1
used when the door is rotated
Pre-installed in the freezer, also
1
used when the door is rotated
Pre-installed on the door, also
1
used when the door is rotated