Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
1. Start Cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating
that the ceramic hob has entered the stat of standby mode.
1. Touch the ON/OFF control. all the indicators
show "-"
3. Touching the heating zone selection control.
2. Finish Cooking
1. Touching the heating zone selection control
that you wish to switch o .
2. Place a suitable pan on the cooking zone
that you wish to use.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
4. Select a heat setting by touching the "-" or "+"
control.
• If you choose level 0, within 1 minute, the
ceramic hob will automatically switch o .
You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
2. Turn the cooking zone o by scrolling down
to "0" or touching "-" and "+" control
together.
OR
17
Publicidad
