Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
SHELF INSTRUCTIONS
Do not cover shelves with aluminum foil or any
other material as this will impede air flow inside the
cabinet and can adversely affect the interior cabinet
temperature.
To prevent damaging the door gasket, make sure to
have the door opened all the way when pulling the
shelves out of the rail compartment.
Removing Glass Shelf
• Pull the glass shelf forward slightly to ensure the
glass notch avoids the latch, then lift the glass
shelf upward to remove it.
Can Dispenser Mode
The top shelf can be converted from a conventional
shelf into a can dispenser, for convenient access to
grab a can without having to reach into the unit.
Tilting the Glass Shelf:
• Pull top shelf all the way out on runners.
• Lift up the glass panel and slide the circular
shelf supports into the second set of slots slightly
further back in the metal frame sides.
• Carefully rest the the back edge of the glass
down on the metal ledge.
Attach the Dividers:
• First hook the tabs of the divider under the front
edge of the glass. Be sure to locate the tabs in
the correct position.
• Locate the back tab of the divider in the correct
metal slot in the back frame.
• Press the back of the divider down until it clips
over the back edge of the glass.
To convert the top shelf back to a conventional flat
shelf, reverse this process.
The dividers can be configured for either 4 lanes of
standard 355mL (12 oz) cans, or 3 lanes of 473mL
tall cans (16 oz).
Do not load cans more than 6 deep or stacked on
top of each other in the can dispenser mode.
Max capacity for the can dispenser:
- Standard 355mL cans (12 oz) x 24
- Tall 473mL cans (16 oz) x 18
10
Publicidad
