Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
INTERIOR LIGHT
The interior light will default to turning on and off
when the door is opened or closed.
Press the light button once to turn the light off while
the door is open. The light will resume default
functioning when the door is closed.
There are four light mode settings:
• L1: Light will turn on and off when the door is
opened and closed.
• L2: Light will remain on indefinitely at 100%
illumination.
• L3: Light will remain on for 120 minutes at 100%
illumination and then resume default operation.
• L4: Gallery Mode
When door is closed the control panel display
will turn off. Cabinet lights will remain on 100%
illumination for 120 minutes, before dimming to
50% and remain on indefinitely.
INTERIOR LIGHT COLOR
The interior light can be set to either white or blue.
• Press and hold the light button for 3 seconds
until the interior light color symbol flashes.
• Press the light button to toggle between a white
or blue light.
The interior light color setting indicator light will
flash 5 times to confirm the change.
FUNCTION INSTRUCTION
The default temperature setting is 43°F (6°C). The
default temperature scale is °F.
To switch the display between °F and °C, press and
hold the Up and Down buttons simultaneously for
approximately 3-5 seconds.
The temperature can be set as low as 34°F (1°C) or
as high as 50°F (10°C).
Actual temperature inside the appliance can vary
based on ambient temperature, how often the
door is opened and how many warm bottles have
recently been added to the appliance.
If the appliance loses power, the control panel
will remember the set temperature. Once power
is restore, the appliance will return to normal
functioning automatically.
If the inner cabinet temperature is higher than
73°F (23°C) for one hour, the error code "HI" will
show on the display, the alarm indicator light will
illuminate and an alarm will sound.
If the inner cabinet temperature is lower than 28°F
(-2°C) the error code "LO" will show on the display,
the alarm indicator light will illuminate and an
alarm will sound.
If the inner cabinet temperature remains at 28°F
(-2°C) for more than 30 minutes, the error code
"CL" will show on the display, the alarm indicator
light will illuminate and an alarm will sound. The
appliance will stop functioning to prevent the
contents from freezing.
NOTE: If the unit is unplugged, turned off or
lost power, you must wait 3 to 5 minutes before
restarting. If you attempt to restart before this time
delay, the Beverage Centre will not start.
There will be a difference between the set
temperature and the LED display on first use or
after a longer period of disuse. After running for
a short time, the temperature will revert to the set
temperature.
8
Publicidad
