WerkaPro JY1938-132 Instrucciones De Uso página 5

The light will automatically switch to dim mode at night and turn on for 30 seconds when it detects movement.
Installation
- Press the button to switch on the light
- Fix the pillar hinge to the wall
- Place the screw hole of the light on the pillar hinge
- Put the screw through the lamp and turn it into the pillar hinge
- Installation is complete.
Note
1. The internal light sensor ensures that the motion sensor will not activate during the day. When the ambient
light becomes dark, the sensor will activate.
2. The product is fitted with an internal lithium battery, please do not replace it yourself, dispose of it with
household waste or place it near heat sources. It should be taken to your local battery disposal centre.
3. Please charge the light at least 8 hours before first use. Installation location, weather conditions and seasonal
variations will directly influence the actual operating time experienced.
Product warranty
We offer a 12-month limited warranty on our light from the date of purchase. To make a warranty claim, please
contact the retailer from whom you purchased this lamp.
Warranty limits
The following items are not covered by our warranty :
1. Purchases from unauthorised dealers or distributors.
2. Damage resulting from fire, damp, misuse, physical shock or other damage occurring after purchase of the
lamp.
3. If the article has been dismantled or modified after purchase.
Warning: be sure to charge in the sun for 8 hours before using for the first time.