Hama 00205284 Instrucciones De Uso página 4

G Operating instruction
1. Controls and displays
1. Power supply (USB-C)
2. HDMI in
3. Status LED
4. Scale/Reset (see 8. Operation)
5. HDMI out
Thank you for choosing a Hama product. Take
your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
If you sell the device, please pass these
operating instructions on to the new owner.
2. Explanation of warning symbols and
notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
speci c hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
3. Package contents
• 4K HDMI splitter
• USB-C | USB-A cable
• Operating instructions
• 2x disposal slips (Triman/WEEE)
4. Safety instructions
• The product is intended for private, non-
commercial use only.
• Use the product only for the intended
purpose.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Children should be supervised to ensure that
they do not play with the product.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it
to any major shocks.
2
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• Do not modify the product in any way. Doing
so voids the warranty.
• Do not attempt to service or repair the
product yourself. Leave any and all service
work to quali ed experts.
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not use the product in the immediate
vicinity of heaters, other heat sources or in
direct sunlight.
• Only use the article under moderate climatic
conditions.
• As with all electrical products, this device
should be kept out of the reach of children.
• Do not use the product in a damp
environment and avoid splashing water.
• Route all cables so there is no risk of tripping.
5. Description
• The 4K HDMI splitter from Hama splits an
HDMI signal evenly across 2 monitors.
• The integrated downscaler scales a high-
resolution input signal to the maximum
resolution that is suitable for both monitors.
6. Functions
• Output: 2 x HDMI sockets
• Input: 1x HDMI plug
• USB-C socket for power
• Plug and Play installation (no software
required)
7. Installation / connection of two HDMI
playback devices
• Connect the HDMI plug to your HDMI source
device (e.g. Blu-ray or set-top box).
• Now connect your two HDMI playback
devices (e.g. at TV and projector) or (e.g.
at TV and at TV) via the HDMI cables (not
included in the scope of delivery) to the
HDMI sockets.