Publicidad
Idiomas disponibles
Idiomas disponibles
A - Stainless Steel Plated Nozzle
B - Water Tank Opening
C - Power Button
D - Handle
E - Power Cord Base
F - Water Tank
G - Water Cup
INSTRUCTIONS FOR USE: ASSEMBLY & START UP
Remove all plastic coverings, labels, and styrofoam from the steamer and cord.
Any water droplets visible inside the tank are from quality control tests.
Always review the garment manufacturer's care label instructions before steaming. Test
fabrics for colorfastness in inconspicuous areas (such as inseam).
Fill water to max level on measuring cup and pour into the water tank. You may add another
20 ml to the cup's marking and pour it into the water tank for an extended steaming time. Do
not overfill the water tank past the MAX indicator line in the water tank as this may cause
water to overflow or leak.
Gently close the water tank opening, and connect the power cord to its compatible electrical
outlet.
Press the power switch. Once the power light is on, steamer will start to heat up. Allow 70
seconds for steam to come out.
To refill/add water to your steamer: Make sure the steamer is cooled down completely before
refilling/adding water to the water tank.
PARTS AND FEATURES
G
A
B
F
C
D
E
Publicidad
