IKEA PARASOLL Manual Del Usuario página 4

English
Get started
PARASOLL door/window sensor has a magnetic strip
that detects when a door, window or cabinet is opened.
You can connect it to smart lighting to illuminate a
space when the sensor is open or use DIRIGERA hub
and IKEA Home smart app to receive notifications if the
sensor opens while you are away from home.
Get started without DIRIGERA hub
1. Open the back of the sensor, insert 1 x AAA battery
and locate the
2. Make sure the smart bulb you want to connect is set
up and switched on.
3. Hold the sensor less than 5 cm away from the smart
bulb you want to connect.
4. Press and hold the
for at least 10 seconds. A red LED light on the sensor
will flash and the smart bulb will blink twice when
pairing is complete.
5. Use the assembly instructions to mount the sensor
in the chosen location and test it by opening and
closing the magnetic strips.
Get started with DIRIGERA hub
Open the back of the sensor, insert 1 x AAA battery and
close it again. Use the assembly instructions to mount
the sensor, then download the IKEA Home smart app
and follow the instructions on screen.
4
Pairing button.
Pairing button on the sensor