Crosby IP IPBK10 Manual De Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP lifting clamps are the most reliable lifting clamps available. But using reliable tools does
not automatically mean that practices are reliable. The people who work with clamps play an
equally important role in reliable lifting. Ensure that everyone who works with CrosbyIP lifting
clamps has been instructed in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP lifting clamps in optimum
condition and keep warranty, regular maintenance is important. Preventive maintenance and repair
shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty pro-
gramme and for more details on maintenance procedures, please consult www.thecrosbygroup.
com/resources/crosbyip-10-year-guarantee for more information.
Please read and understand these instructions before using the lifting clamp.
It is not
Safety precautions
permitted to stay
2.
in the danger
zone of the load.
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
reliability in the working environment.
No changes may
„ IPBK10 clamps may be applied per piece, per set or several at the same time for the lifting of
be made to
steel beams where the web must be kept in a horizontal position (H-position).
CrosbyIP
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
clamps. Never
or more, a spreader beam is recommended.
straighten,
„ To manifest a safe and secure grip of the lifting clamp on the flange, the A-measurements of
attempt to bend
the flange must at least contain the following values:
or heat treat
parts.
Type
Clamps suited
0,5 IPBK10
for stainless
steel, must be 1,5 IPBKZ
used only for
3,75 IPBKZ
handling
stainless steel,
„ Hardness: With the standard clamps it is possible to lift steel with a surface hardness of 363
to avoid contact
HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
corrosion.
„ Temperature: the operating temperature is between –40 ºC (–40 ºF) and 100 ºC (212 ºF). For
other temperatures contact your CrosbyIP Customer Service Centre.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPBK10
Lifting and stacking of beams
0,75 IPBKZ 1 IPBK10
2 IPBK10
4 IPBK10
A
30 mm 1 3/16"
47 mm 1 7/8"
52 mm 2 1/16"