Airzone AZ BLUE C Serie Manual Del Usuario página 17

ERRORS
In the case of any of the following errors, please contact your installer:
Communication errors
EN
1. Thermostat – Main control board / Zone Module
2. Main control board – Zone Module
8. Lite thermostat – Main control board
9. Gateway – Airzone system
10. BACnet gateway – Main control board
11. Gateway – Indoor unit
12. Webserver – Airzone system
13. Control module of radiant elements – Main control board
14. Expansion module – Main control board
15. Consumption meter – Main control board
17. Lutron gateway – Main control board
18. Dehumidifier module – Main control board
19. Alarm jumper error – Main control board
C-02. Production control board – Main control board
C-09. Air to water gateway – Production control board
C-11. Air to water gateway – Air to water unit
V01. AZX6CM1VALR Module – Main control board
V02. AZX6CM1VALR Module – AZX6AC1VALR Head
AC unit error. Anomaly in the AC unit
Purification errors
IAQ1. Loss of communication between the main control board and the ionization processor
IAQ2. Loss of communication between the particle sensor and the main control board
IAQ3. Zone module with ionization not connected
IAQ4. Actuator connected directly without ionizer
Other errors
3. Motorized element not connected to the actuator output
4. Unusual behavior of the motorized element
5. Open circuit in temperature probe
6. Short circuit in temperature probe
16. Measuring error in consumption meter
F05-H. Heat battery temperature sensor is opened
F05-C. Cold battery temperature sensor is opened
F06-H. Heat battery temperature sensor is short circuited
F06-C. Cold battery temperature sensor is short circuited
F0506-HC. Heat or cold battery temperature sensor is opened or short circuited
R05. Control module of radiant elements temperature sensor is opened
R06. Control module of radiant elements temperature sensor is short circuited
17