OPERATING INSTRUCTIONS
CAUTION
• When the two blade release buttons are pressed,
the installed blade will fall off (Fig. 1c).
e. Insert the narrow end of the replacement blade
into the machine housing. Press the blade
housing against the machine housing until it
engages with an audible click.
2. Attaching/Removing Battery Pack (Fig. 2)
To Attach Battery Pack
a. Align the raised portion on the battery pack with
the grooves on the bottom of the machine, then
slide the battery pack onto the machine, as
shown.
b. Make sure that the latches on the battery pack
snap into place and the battery pack is secured
to the machine before beginning operation.
NOTICE: When placing the battery pack on the
machine, be sure that the raised rib on the battery
pack aligns with the groove on the machine and
the latches snap into place properly. Improper
assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release the
battery pack.
b. Pull backward on the battery pack to remove it from the machine.
1c
1d
2
Battery-release buttons
11
3
4
CLICK