Giordani Tigrotti 1245022 Instrucciones página 16

Giordani Tigrotti
UK
ASSEMBLY INSTRUCTIONS
1. See figures from 1 to 9.
USE OF THE SAFETY BELTS
2. See figures from 10 to 12.
USE OF THE RECLINING FUNCTION
3. See Figure 13.
USE OF THE TOY BAR
4. I n s e r t t h e e n d s o f t h e b a r i n t o t h e
appropriate holes on the sides of the
frame. The toy bar is adjustable; hence
the child can be placed without removing
the bar. See Figure 14.
STORAGE AND TRANSPORT
5. See Figure 15.
USE OF THE SWING CONTROL MODULE
6. See Figure 16.
Speed selection button and
indicator.
The TrueSpeed Control offers constant
motion that calms your baby.
To activate the rocking function:
Rotate the control speed selection and
select the speed. The five LED lights next
to the button indicate the selected speed.
If you do not set the time, the device
switches off automatically after 90 minutes.
Or you can stop the movement by pressing
the timer button for 5 seconds.
Note: you do not need to manually push
the swing. Once you select the speed, the
swing will automatically adapt movement
to the desired speed within seconds from
selecting the speed.
Melody/Sounds button.
To use the Melody/Sounds button:
Press the Melody/Sounds button to start
the melody/sounds and select the desired
m el od y/ s o u n d . T h e re a re 7 d i f fe re n t
melodies/4 different sounds. To stop the
music, press and hold the timer button for
5 seconds, otherwise the music/sound will
automatically stop after 90 minutes.
Swing timer and indicator.
To activate automatic switch off of
GR378-Altalena_Tigrotti_v2.indd 16 GR378-Altalena_Tigrotti_v2.indd 16
swing
(FROM 0 TO 6 MONTHS APPROXIMATELY)
the swing, use the timer function. Press
the button to select the desired time
interval of 15, 30 or 45 minutes. The three
LED lights next to the button indicate the
selected range. If you do not select a time
interval (all LED lights off) the device will
automatically switch off after 90 minutes.
Locking /release knob.
U s e t h e k n o b to l o c k o r r e l ea s e
the seat.
CLEANING AND MAINTENANCE
Seat cushion: remove the seat lining. Fasten
th e s a fet y bel t b uck l e s a n d th o s e p l a ce d
on the cushion. Close all the Velcro latches.
Hand wash. Do not bleach. Tumble dry at low
temperature.
Games bar and games: clean with a damp cloth
and mild detergent. Leave to air-dry. Do not
immerse in water.
Frame: clean the metal frame with a soft, clean
cloth and mild detergent.
Cover:
Structure:
Open:
Closed:
BATTERY INSTALLATION
The swing control module is activated using
(4) size C/LR14 (1.5V) alkaline batteries
(not included in the package).
W A R N I N G : F o l l o w t h e i n s t r u c t i o n s o n
b a t t e ri e s c o n t a i n e d i n t h e
section. Otherwise, the batteries may have
16
MATERIALS
Polyester
Steel
Polypropylene
Thermoplastic rubber
SIZES
L: 73.6 cm;
H: 59.8 cm;
D: 56.3 cm.
L: 60 cm;
H: 12.5 cm;
D: 37.5 cm.
WARNINGS
W A R N I N G
01/02/23 10:57 01/02/23 10:57
S