TMEZON J7 Manual De Instrucciones página 3

Specification for smart doorbell
Lens
PIR motion sensor
Microphone
Doorbell button
LED Indicator
Charging Indicator
Micro USB port
(for battery charging)
Doorbell comes with a 4500mAh rechargeable
Li-ion battery.
GB - 1 support@tmezon.com
On / Off Switch
Reset button
SD card slot
Speaker
Li-ion battery
built-in
Security Screw
Item
Power Port DC 5V 1A; battery (4500mAh)
Press the button to activate the doorbell
Doorbell button
145°
Viewing angle
Motion Detect range
100° (Max 5m)
Microphone Capture sound for your video
Storage video (SD card Max.128G)
SD card slot
Reset
Press and hold on for 5 seconds to reset
Ip65
Ingress protection
Operating Temperature −20 °C to 50 °C
34.5 × 56 × 134.6mm
Dimensions
Doorbell indicator explanation
Indicator
Solid Red
Device is abnormal.
Flashing Red Slowly
Ready for WiFi configuration.
(Once per second)
Flashing Red Quickly
Device is connecting to WiFi.
(Twice per second)
Solid Blue Successfully connected to WiFi network.
Flashing Blue Slowly
Live-viewing for doorbell camera.
(Once per second)
Flashing Blue Quickly
Firmware upgrading .
(Twice per second)
Charge doorbell
Prior to the doorbell installation, please charge up your
doorbell for about 8-10 hours till the charging LED turns
BLUE from RED.
LED status
Solid red
Solid blue
GB - 2 support@tmezon.com
Description
Status
Indication
Battery charging
Fully charged