Publicidad
Idiomas disponibles
Idiomas disponibles
The Laser Does Not Turn On
•
Make sure the unit have power
•
If the laser unit is heated above 120˚F (50˚C), the unit will not turn on. If the laser has been stored in
extremely hot temperatures, allow it to cool. The laser level will not be damaged by pressing
the on/off button before cooling to its proper operating temperature.
The Laser Beams Flash
The lasers are designed to self-level up to an average of 3° in all directions If the laser is tilted so much
that the internal mechanism cannot level itself, the laser beams will flash indicating that the tilt range
has been exceeded. THE FLASHING BEAMS CREATED BY THE LASER ARE NOT LEVEL OR PLUMB
AND SHOULD NOT BE USED FOR DETERMINING OR MARKING LEVEL OR PLUMB. Try repositioning
the laser on a more level surface.
6.Troubleshooting
- 13 -
Publicidad
