Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Selecting a tool
Application
Hammer drilling
Chiselling
Standard drilling
in wood, metal,
ceramics and plastic
˜ Tool-changing
Use the SDS-Plus tool holder
o
tools quickly and easily without the need for
any additional tools.
The SDS-Plus drilling tool moves freely
o
(depending on the system). This leads to a
radial run-out deviation while idling. This has
no effect on the accuracy of the drill hole as
the drill centres itself during drilling.
The dust protection cap
o
the entry of drilling dust into SDS-Plus tool
holder during operation. Ensure that the dust
protection cap does not get damaged when
fitting tools.
NOTE
A damaged dust protection cap
u
be replaced immediately. Contact a
customer service workshop.
˜ Fitting an SDS tool/Keyless
chuck
WARNING!
m
Do not use the keyless chuck
u
drilling and chiselling operations!
30 GB/IE
Tool
SDS-Plus insertion tool
Appropriate SDS-Plus
drilling tool
SDS-Plus quick-release
chuck for drilling tools
without SDS-Plus fitting
to change
[
]
largely prevents
[
]
must
[
]
in hammer
[
]
1. Grease the SDS-Plus tool holder
with drill chuck grease
the tool.
2. Insert the tool rotatingly into the SDS-Plus tool
holder
until it clicks into place.
[
]
3. Check that the tool is properly locked by
pulling it. The system has radial play because
of the design.
˜ Removing an SDS tool
Pull the locking collar
o
remove the tool.
˜ Selecting operating mode
Press and hold the release button
o
mode selection knob
selection knob so that the arrow mark points
to the corresponding symbol.
Symbol
Operating mode
Drilling
Hammer drilling
Chiselling
Adjusting chisel position
Adjusting chisel position
In order to rotate the insertion tool to the required
position for chiselling, proceed as follows:
1. Turn the mode selection knob
(adjusting chisel position).
2. Turn the insertion tool in the SDS-Plus tool
holder
into the required position.
[
]
3. Turn the mode selection knob
(chiselling).
slightly
[
]
before inserting
[
]
backwards to
[
]
on the
8 ]
[
. Turn the mode
9 ]
[
to
9 ]
[
to
[
9 ]
Publicidad
