Care Of Your Cr60; Servicing; Accessories And Spare Parts - Profile CR60 Manual De Instrucciones

Care of CR60
The CR60 can be cleaned occasionally by
wiping the outside of the case with a damp
cloth. DO NOT wipe the inlet filter. (Refer
also to the section on sterilisation).

Servicing

It is not possible to recommend a standard
time between routine servicing for CR60 units
as one patient may use the machine more
than another. However as this medical device
is to be relied upon for some years, we
recommend that it is serviced by ourselves or
by a qualified technician at least once a year.
This will allow us to check the performance of
the compressor, recalibrate it if necessary, and
allow us to check the electrical integrity of the
entire unit.
To assist you, we have listed possible
problems (see "Fault finding").
6

Accessories and spare parts

Accessories should be replaced regularly.
It is recommended that all accessories are
changed at least once a year, especially the
Sidestream and High Pressure Duratube if
the CR60 is being used three or more times
a day.
The filter should be replaced every three
months (see 'filter changes').
Heath Place, Bognor Regis, West Sussex, PO22 9SL, United Kingdom
Web: www.profilehs.com Email: info@profilehs.com
Telephone: +44 (0) 870 770 3500
Facsimile: +44 (0) 870 770 3501
If you cannot solve a problem or would like
to order any spare parts, then contact our
Customer Service Department and have the
following information ready:
1. Unit Serial No. (The Serial No. is located
at the back of the compressor).
2. Type of drug used and the frequency of
treatment.
Profile Respiratory Systems,
International Department: