Publicidad
Idiomas disponibles
Idiomas disponibles
Connection
Connect the MT91 with an inverter:
Connect the MT91's "inverter terminal" and the inverter's RJ45 port using the RS485 communication
cable (included accessory, model: CC-RJ45-3.81-100U). The cable length can be customized according to
customers' requirements.
Connect the MT91 with an auxiliary module:
Connect the "remote terminal" of the MT91 to auxiliary modules such as the Bluetooth module,
wireless module, or BMS using an adapter cable.
Installation
1.
Installation by mounting on a surface is recommended.
2.
Find a suitable location, based on the installation size (91mm) and drill two screw holes (no
smaller than 77x52mm).
3.
Use two PWM3*10 screws to fix the remote meter.
Publicidad
