Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x table top (1)
1 x table leg adjustable for height (2)
3 x table leg (3)
8 x screw (4)
8 x spring washer (5)
8 x flat washer (6)
1 x hex key (7)
1 x assembly instructions
1 x quick start guide
Intended Use
This article is not intended for commercial use.
The article is designed for use in the private
living area, e.g. balcony, terrace or garden.
Technical Specifications
Dimensions: approx. 150 x 74 x 90cm (W x H x D)
Weight capacity: max. 60kg
Date of manufacture (month/year):
12/2020
Safety Instructions
Risk of Death!
• Never leave children with the packaging ma-
terial without supervision. Risk of suffocation.
Risk of Injury!
• Ensure the correct stability has been achieved
before using the article.
• Place the article on a level surface.
• The article may only be used with adult super-
vision and may not be used as a toy.
12
GB/IE
• Check the article for damage or wear before
each use.
• Do not use the article close to a naked flame.
• Never stand or sit on the table.
• We recommend that two persons assemble
the article together in order to avoid injuries
or damage to people or the article.
Avoid damage to property!
• Secure the article during extreme weather
conditions, e.g. in strong winds. Store the
article in a sheltered room.
Instructions for assembly
1. Place the table top (1) on a soft, flat surface
for assembly (Warning: hard surfaces can
scratch the table top!) (Fig. B).
2. Turn over the table legs (2) and (3) with the
feet pointing upwards. Attach the table legs
to the table top (Fig. B). To do this, insert the
screws (4) through the spring washers (5) and
flat washers (6) into the fastening holes in the
table frame and into the table legs, and screw
them tightly (Fig. C).
3. Tighten each screw with the hex key (7)
(Fig. D).
4. Turn the product over and place it flat on the
ground.
5. Adjust the table leg (2) with the height
adjustment to achieve optimal table stability
(Fig. E).
Storage
• When not in use, always store the product
clean and dry at room temperature.
• Please take note that the wood can alter its
characteristics because of changing tempera-
tures, humidity, and other factors.
• The wood used in the article is a natural pro-
duct and it is therefore possible that there will
be small discrepancies in colour and structure.
Cleaning and Care
• Clean the article with a soft brush and a mild
soap solution.
• Leave the article to dry completely after clea-
ning.
Publicidad
