Publicidad
Idiomas disponibles
Idiomas disponibles
SFA 6600
B: TIMER BUTTON
Press the "Timer" button when the fan is on. The indicator will show the time remaining until
the fan turns off. You can select the length of time the fan will run between 0.5 and 7.5
hours in 0.5 hour increments. Press the TIMER button repeatedly and the sum of the lights
values will be the remaining time until it turns off.
C: AIR SPEED BUTTON
3. Press the "ON/OFF" power button to turn on the fan.
4. Set the fan speed among three options (Low-Medium-High) by pressing "AIR SPEED"
several times. The LED light will show low speed, medium speed and high speed
respectively.
D: MODE BUTTON
El modo de viento se puede ajustar presionando el botón "MODO".
1. Normal: The fan will operate on high, medium or low mode as set.
2. Natural: The fan will operate at low, medium and high speeds in different patterns to
provide airflow that replicates natural airflow.
3. Sleep: Sleep mode can operate at low, medium and high speeds. In this mode the air
speed will decrease in set patterns from the selected speed to off and repeat the cycle.
E: ON/OFF BUTTON
Press the "ON/OFF" button to turn the fan on or off.
3. Every 72 hours, the lights on the control panel flash to indicate that the water tank
needs to be cleaned. Press the "ON/OFF" button for 5 seconds to reset.
F: OSCILLATION BUTTON
When you press the "Oscillation" button, the fan head will move continuously from side
to side. Pressing the button again will stop the oscillation.
G: REMOTE CONTROL
The above functions can be controlled using the remote control by pressing the
corresponding function buttons.
See Image XII. To use the remote control, insert two 1.5V AAA batteries into the battery
compartment.
20
Publicidad
