RIB SUPER 8000 INV Manual página 27

SYSTEM LAY-OUT
A - SUPER 8000 INV operator
B - Photoelectric cells (external)
C - Rack M6
D - Key selector
E - Tuned aerial
F - Flashing lamp
H - Galvanized column for P.E. cells
I - Photo electric cells (internal)
L - Safety strip fixed to column
M - Mechanical or electrical safety strip with RED transmitter
TECHNICAL FEATURES
Irreversible operating devices for sliding gates with a maximum weight of 8000 kg / 13.200 lbs.
SUPER 8000 INV is designed for continuous use and is equipped with an inverter that allows gradual
starts, high speed and a gradual deceleration when reaching the end of the run.
CAUTION: BY REMOVING THE INVERTER COVER YOU WILL NOT HAVE ACCESS TO ANY DEVICE THAT WILL
MAKE YOU VARYING THE OPERATOR'S SPEED. YOU WILL ONLY INVALIDATE THE WARRANTY.
Its self-braking motor is useful to limit the inertia of the gate when stopping.
605
302,5
295
20
60
185 210
Measurements in mm/inch
27
TECHNICAL DATA
Max. leaf weight
Operating speed
Thrust force to constant turns
Max torque
Rack module
EEC Power supply
Motor capacity
Power absorbed
Normative cycles
Power supply
Motor capacity
Power absorbed
Normative cycles
Power supply
Motor capacity
Power absorbed
Normative cycles
Daily operations suggested
Service
Guaranteed consecutive cycles
Lubrification
Weight of electroreducer
Noise
Working temperature
Protection
1
SUPER 8000 INV
kg 8000
m/s 0,33
N 9000
Nm 405
M 6
400V 3~ 50Hz
W 3000
A 6,39
n° 300 - 95s/2s
380V 3~ 60Hz
W 3000
A 6,39
n° 300 - 95s/2s
220V 3~ 60Hz
W 3000
A 10,8
n° 300 - 95s/2s
n° 700
% 100
n° 700/10m
SHELL OMALA S2 G100
kg 120
db <70
°C -10 ÷ +55
IP 55
G
B