Blastrac CV 324 Manual De Instrucciones página 10

- Troubleshooting
Problem
The vacuum cleaner does not start
The vacuum cleaner speed increases
Dust leaks from the vacuum cleaner
The suction motor is noisy
- Recommended spare parts
See fig. 16.
Cause
No current
Clogged main filter
Clogged vacuum hose
Torn filter
Inadequate filter
Worn or broken motor carbon brushes
Worn or failing motor bearings
– 7 –
Remedy
Check if there is current in the socket
Check if the plug and the cable are
damaged
Contact an authorized Service Center
Shake the filter. Replace it if this is not
sufficient
Check the vacuum hose and clean it
Replace it with another of identical
category
Replace it with another of a suitable
category and check
Remove and replace the motor carbon
brushes
Remove and replace the vacuum motor
US