Blastrac CV 324 Manual De Instrucciones página 6

- Vacuum cleaner description - Labels
See fig. 1.
A - Identification plate: Code of the model,
technical specifications, serial number, year of
manufacture
B - Dust container
C - Fastening latches
D - Handle
E - Inlet
F - Exhaust
G - Attention plate for filter shaking
H - Panel power plate
I - Attention plate for the vacuum cleaner's use
L - Prohibition plate for no vacuuming of
combustible or dangerous materials
M - Model plate
This vacuum cleaner creates a strong air flow which is
drawn in through the inlet (E) and blows out through
the outlet (F).
Before turning on the vacuum cleaner, fit the vacuum
hose into the inlet and then fit the required tool on to
the end part (refer to the manufacturer's accessory
catalogue or Service Center). This vacuum cleaner is
equipped with an internal baffle plate which subjects
the vacuumed substances to a circular centrifugal
movement that makes them drop into the container.
The vacuum cleaner is equipped with a main filter
which enables it to be used for the majority of
applications.
- Accessories
Various accessories are available; refer to the
manufacturer's accessory catalogue.
ATTENTION DANGER !
Use only genuine accessories supplied and
authorized by the manufacturer.
- Packing and unpacking
Dispose of the packing materials in compliance with
the laws in force.
- Cardboard box packing (fig. 2)
Model
A (in)
B (in)
C (in)
lbs
- Setting to work - connection to the power
supply
ATTENTION DANGER !
-
Make sure that the vacuum cleaner is off.
- Make sure that the vacuum cleaner is in perfect
condition before starting work.
- Before plugging the vacuum cleaner into the
electrical mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electrical mains.
-
Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electrical
mains and plug are correct.
- Use the vacuum cleaners only when the
connection cable to the electrical mains are in
perfect condition (damaged cables could lead to
electric shock!).
- Regularly check that the electric cable does not
show signs of damage excessive wear, cracks
or ageing.
ATTENTION DANGER !
When the vacuum cleaner is operating, do not:
- Crush, pull, damage or tread on the cable that
connects to the electrical mains.
-
Only disconnect the cable from the electrical
mains by removing the plug (do not pull the
cable).
- Only replace the electric power cable with one
of the same type as the original.
- The cable must be replaced by the
manufacturer's Service Center staff or by
equivalent qualified personnel.
– 3 –
BDC-1216/CV324/CAV10
26.8
24.0
41.5
103.6
US