Publicidad
Idiomas disponibles
Idiomas disponibles
1English1
the hex cap screws into each side of the bail handle and tighten securely with hex
wrench. (see Fig. 3)
Fig. 3
SIDE HANDLE
The side handle for your polisher can be fitted on either side of the gear case. Position
the side handle in the location which offers best control and guard protection. To install,
thread side handle into handle socket and tighten securely.
INSTALLING / UNINSTALLING THE BACK PAD / POLISHING PADS /
BONNETS
1. To remove the battery pack.
2. Press and hold the spindle lock button.
3. Thread the back pad onto the spindle. Hand-tighten securely.
4. Press the polishing pads / bonnet securely on to the back pad. Use a centering tool,
if provided, to ensure the pad is aligned for proper balance.
5. To uninstall, remove the battery pack and reverse the procedure.
3
Fig. 4
English
-9
Publicidad
