Descargar Imprimir esta página

SOLAC HU1052 Instrucciones De Uso página 12

Ocultar thumbs Ver también para HU1052:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
CLEANING
Disconnect the appliance from the mains and allow it to cool
before undertaking any cleaning task.
Clean the electrical equipment and the mains connection with
a damp cloth and dry. DO NOT IMMERSE IN WATER OR ANY
OTHER LIQUID.
Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such
as bleach, or abrasive products, for cleaning the appliance.
Never submerge the appliance in water or any other liquid or
place it under running water.
Never submerge the connector in water or any other liquid or
place it under running water.
If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration of the
appliance's useful life and could become unsafe to use.
Then dry all parts before its assembly and storage.
There may be some scale deposits in the transducer, particularly
in areas with hard water:
- Overcome this drawback by cleaning the transducer.
- Rub down with a dry cloth and remove remains of moisture.
- Do not place the transducer directly under the tap.
- Do not rub the transducer with hard or metal objects.
- Do not clean with chemical products.
HOW TO DEAL WITH LIME SCALE INCRUSTATIONS:
For the appliance to work correctly it should be kept free of
limescale or magnesium incrustations caused by the use of
hard water.
To prevent this kind of problem, we recommend the use of water
with low lime or magnesium mineralisation.
EN

Publicidad

loading