Descargar Imprimir esta página

Dometic GROUP TD283 Guía Breve De Instalación página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
Pos. in A Compo-
Description
nent
10
Settings menu
Bluetooth: Activating or deactivating the bluetooth function of connected N-BUS
devices with bluetooth function.
Silent Mode: Activating or deactivating the silent mode. With silent mode acti-
vated, the fan (if present) of connected N-BUS devices is switched off and the de-
vices charge at reduced power to prevent overheating.
Display: Setting a timer (in min) for dimming the backlight and switching the dis-
play to standby. Setting the button and warning tone signals (BEEP).
Battery: Setting the type and rated capacity of the connected house battery.
Charging Profile: Setting the charging profile suitable for the connected house
battery.
Solar Panels: Setting the nominal output (in Wp) for connected solar panels.
Date&Time: Setting the date and time.
Language: Setting the language.
N-BUS: Opening an overview of connected N-BUS devices.
Solar charge controller menu
The following is displayed (see Fig. , C):
Current value for voltage (in V) of the starting battery (1)
Hist.
Open
for an overview of the solar energy delivered over the last 3 weeks.
(2)
Daily output (in Wh) of connected solar panels (3)
Status of the solar charge controller (Standby/MPPT/Absorption/Float/Off) (4)
State of charge of the house battery (circle diagram in 5/25 % steps) with current
values for voltage (in V) and current (in A) (5)
Battery charger menu
The following is displayed (see Fig. , D):
Status of the battery charger (Standby/Bulk/Absorption/Float/Off) (1)
Voltage (in V) of the starting battery (2)
State of charge of the house battery (circle diagram in 5/25 % steps) with current
values for voltage (in V) and current (in A) (3)
House battery menu
The following is displayed (see Fig. , E):
Status of the battery (On/Off) and time to full charge/discharge (1)
Battery capacity in Wh (2)
Battery condition (State of Healt (SoH) in %) (3)
Analysis of the battery temperature (OK, High or Low) (4)
State of charge of the house battery (in %) with current values for voltage (in V) and
current (in A) (5)
If more than one battery is connected in the N-BUS network: Open
overview of the individual battery condition and battery temperature for up to 4
batteries in the network (not shown)
Hist.
for an

Publicidad

loading

Este manual también es adecuado para:

9620013272