Dometic GROUP TD283 Guía Breve De Instalación página 9

Using the display
Fig.  on page 5
Pos. in A Compo- Description
nent
Shows active functions (Bluetooth) of connected N-BUS devices, time and notifications (error mes-
sages).
1 Status bar
Shows the selected menu.
Menu
2
display
As start screen, the main menu is displayed.
Via the menu bar, the main and settings menu as well as the menus for connected devices can be se-
lected.
The menu for currently connected devices is shown in white, the menu for active devices (status
"On") is shown in yellow and the menu for devices that are not connected is grayed out. Grayed out
menus are not selectable.
3 Menu bar
Bluetooth function of connected N-BUS devices
Lights up yellow as soon as the Bluetooth function of connected N-BUS devices is activat-
ed.
Error indication
A red dot on the bell indicates that an error has been detected. The error messages can
be called up by pressing the bell.
Power button
Switches off the display and all N-BUS-capable devices in the network.
Main menu
The following is displayed (see Fig. , B):
• Status (On/off) and voltage (in V) of the house battery (1)
• Status of the battery charger (Standby/Bulk/Absorption/Float/Off) and power
supply (in A) from the battery charger (2)
• Status of the inverter (On/Off) and output voltage (in V) of the inverter (3)
• Status of the solar charge controller (Standby/MPPT/Absorption/Float/Off) and
power supply (in A) from the solar charge controller (4)
• State of charge of the house battery (circle diagram in 5/25 % steps) with current
values for voltage (in V) and current (in A) (5)
9