PNI SafeHouse HS281 Manual Del Usuario página 8

Standby mode:
After the priming period, the LEDs will turn off
and the device enters standby mode. The green
LED will flash once every 30 seconds.
Test:
Briefly press the button on the device to test if
the buzzer and LEDs are working. The red LED
will flash 4 times and the buzzer will sound 4
times.
Alarm:
In case of alarm, the red LED blinks often (4
blinks every 5 seconds) and the buzzer sounds
(4 beeps every 5 seconds).
Low battery:
In case of low battery, the yellow LED will flash
once every 30 seconds and the buzzer will
sound once every 30 seconds.
Sensor error:
In case of sensor error, the yellow LED will
flash twice every 30 seconds and the buzzer
8