Silvercrest STLKS 12 A1 Instrucciones De Servicio página 29

3. Remove the filter holder 14 from the
lid 15 by turning it slightly downwards
(as shown).
4. Pull the filter upwards out of the filter
holder 14 and dispose of it.
5. Place the new filter in the filter hold-
er 14.
6. Place the filter holder 14 under the
lid 15 from below and turn it (as
shown) until it is firmly seated.
7. Put the lid 15 back on the water
tank 13.
8. Push the water tank 13 back into the
device 10. It clicks audibly.
6.3 Housing
1. Clean the housing from time to time
with a damp cloth using a small
amount of detergent.
2. Dry with a soft cloth.
27
GB