BGS technic 72097 Manual De Instrucciones página 12

SELECTION UNIT
The button
The display shows the selected unit on the right.
Unit N-m
SETTING THE TORQUE VALUE
The torque value can be set by pressing the button
Pressing the button
Pressing it shortly increases or decreases the lowest value.
The longer one of the two buttons is pressed, the faster the torque value increases or decreases.
25 Nm
SELECTION PEAK HOLD / TRACK MODE
Long press the button
You can switch between peak hold and track mode by pressing one of the two buttons
The display shows a T for track mode or a P for peak hold mode at the bottom right of the display.
Once the selection has been made, it can be confirmed by pressing the button
jump to the next point in the menu.
Power on
Press
button
Delete No.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
can be used to choose between the units N-m / in-lb / ft-lb / kg-cm.
Press
button
Unit ft-lb
to increase the value and pressing the button
Press
button
to switch between peak hold or track mode.
long
press
Record no.
Press
button
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Press
button
Unit in-lb
or .
28 Nm
Peak / Track
Track Mode
Press
button
Not used
Press
button
Unit kg-cm
to decrease the value.
Press
button
30 Nm
or
and you will
Select
Peak Hold Mode
Press
button
Press
button
Peak Hold
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
.