fanttik NEX L1 Pro Instrucciones página 6

LED Flashlight
Gently squeeze the speed adjustment trigger to turn on the LED flashlight.
Charging
To charge the screwdriver, connect it to a 5V 1/2A adapter using a USB-C cable.
The indicator flashes during charging.
When charging is complete, the indicator switches off.
4 lights indicates 100%-75% charge.
3 lights indicates 75%-50% charge.
2 lights indicates 50-25% charge.
1 light indicates less than 25% charge. No lights means out of power.
Installing and Removing the Bit
1. Insert the bit into the 2. Pull on the outside
automatic clamp to remove
03
– English