Medion OBL-1502000E Manual De Instrucciones página 183

WLAN connection via WPS
After you have selected a WLAN network that has the option to connect via WPS, the WPS
menu appears.
If you do not want to establish a connection via WPS, select the entry SKIP WPS (continue
with „Entering a network key" on page 183).
WPS button
 Select the PUSH BUTTON option to enable the WPS function to be used via the rou-
ter's WPS button.
 Then press the WPS button on the router and press OK to confirm the connection with
the audio system.
You can also access the WPS function at any time
The appliance will now establish a connection with the network. After successfully establis-
hing a connection, a corresponding notice is then displayed.
The appliance can now play back media via the network and receive internet radio stations as
long as there is an active internet connection via the network.
The appliance stores the connection data so that it does not need to be re-entered to re-es-
tablish the connection.
Entering a network key
If you have previously selected SKIP WPS, you must enter the network key manually.
 Enter the network key.
 Once you have entered the network key, select OK and then press OK to confirm.
The appliance stores this key so that it does not need to be re-entered to re-establish the
connection.
The appliance will now establish a connection with the network. Once the connection is suc-
cessful, a corresponding notice is then displayed.
 Press OK to confirm.
The appliance can now play back media via the network and receive internet radio stations as
long as there is an active internet connection via the network.
1 In internet radio mode, you can only use the WPS function via the set-up wizard.
by pressing and holding the INFO button.
1
DE
FR
NL
ES
IT
EN
183