Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
NOTE:
•
When you connect a 3.5 mm plug to the AUX IN port, a melody will play and
the speaker will then automatically enter AUX IN mode.
•
You can change the volume on the speaker. For all other playback options,
use the external device's controls.
•
If the speaker is paused in AUX IN mode for more than 10 minutes, it will
automatically turn off to save power.
USB stick
1.
Press and hold the
lights will turn on.
2.
Insert the USB stick into the USB port.
NOTE:
•
When you connect a USB disk, a melody will play, and the speaker will
automatically enter USB mode.
•
For best playback, make sure only compatible audio files (MP3, WAV, WMA,
FLAC or AMR) are stored on the USB stick.
3.
To remove the USB stick, simply pull it out of the USB port.
NOTE: If the speaker is paused in USB mode for more than 10 minutes, it will
automatically turn off to save power.
Pairing a Bluetooth device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1.
Switch on the Bluetooth device (such as your phone or tablet):
• Go to settings on your device.
• Select Bluetooth and turn it on.
NOTE: Before attempting to connect a device with the speaker, check and remove
any other connections, such as an AUX IN cable or USB stick. Moreover, if your
Bluetooth device was previously connected to another device, remove that
connection.
2.
Press and hold the
will enter the Bluetooth mode (default mode). (If the speaker is already on but not in
Bluetooth mode, press the
automatically start searching for a new or existing Bluetooth device. While the speaker
is searching for the Bluetooth device, the Bluetooth indicator light will flash blue.
3.
When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD TUB LIGHT,
select the name and confirm the connection. A melody will play, and the Bluetooth indicator
light will change to a constant colour to confirm the devices have successfully paired.
4.
Only one external device can be connected to the speaker at a time. Press and hold
the
button to disconnect the Bluetooth connection and initiate pairing for the new
external device. A melody will play to confirm the disconnection. You can also disconnect
the Bluetooth connection on the external device.
button to turn on the speaker. A melody will play, and the speaker
button to turn on the speaker. A melody will play, and the speaker
button to enter Bluetooth mode directly.) The speaker will
23
EN
Publicidad
