B
Product usage
All modes
Bluetooth/USB
FM
All modes
Bluetooth/USB
FM
FM Radio
The radio has a built-in antenna.
•
Press and hold the
lights will turn on.
•
Press the
button to select "FM radio". A melody will play.
•
Press and hold the
speaker will stop searching once it has found all the available stations.
•
Press and hold the -/+ buttons to select and listen to a radio station.
NOTE: If the speaker cannot find any radio stations, try moving it to a different
location where it can receive a better FM radio signal.
LED lights
Press the
button repeatedly to select one of the three LED light displays or turn the lights off.
Connecting two speakers (TWS)
You can connect two EDENWOOD TUB LIGHT speakers to play music at the same time. The
LED lights and playback buttons can be used on either speaker to operate it in TWS mode.
1.
Make sure that both speakers are not connected to any other Bluetooth devices.
2.
Place the speakers within 10 metres of one another (without obstructions).
3.
Turn on both speakers. The blue LED lights will flash.
4.
In Bluetooth mode, press the
speaker). The main speaker's TWS indicator will flash while searching for the other
speaker. The speakers will play a melody to confirm that they are connected in TWS mode
and the TWS indicator on both speakers will be steadily lit.
5.
Connect the external Bluetooth device through its Bluetooth settings to the speakers.
Choose the pairing name of the master speaker. When connected, a melody will play, and
the Bluetooth indicator light will become constantly blue.
6.
Press the
button on either speaker to stop using the TWS mode. The speaker will
play a melody and your external device will now only be connected to one speaker.
Press to decrease the volume.
Press and hold to skip to the previous track
or file.
Press and hold to skip to the previous FM
radio station.
Press to increase the volume.
NOTE: A beep sounds when you have reached
the highest volume setting.
Press and hold to skip to the next track or file.
Press and hold to skip to the next FM radio
station.
button to turn on the speaker. A melody will play, and the speaker
button to start an automatic scan and save FM radio stations. The
button on one of the speakers (this will be the master
25
EN