Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
INSTALLING THE REFRIGERATOR
{cont.}
r_] LEVEL THE REFRIGERATOR
The leveling
legs hove 2 purposes:
1) Leveling legs adjust so the refrigerator
is
firmlg positioned
on the floor and does not
wobble.
2} Leveling legs serve as a stabilizing
brake
to hold the refrigerator
securely in position
during operation
and cleaning. The leveling
legs also prevent the refrigerator
from
tipping.
r_
Remove the grille bg removing the two Phillips
head screws.
r_
Turn the leveling legs clockwise
to ruise
the refrigerator,
counterclockwise
to lower it.
CAUTION: To °void
possible
personal
injurg or propertg
damage,
the leveling
legs must be firmlg touching
the floor.
r_
Replace the base grille bg inserting the two
Phillips head screws.
r_] SET THE CONTROLS
Set the controls to the recommended
setting.
5
5
I"EOO''E"OEOOO"'"O'S
0 is off
0 is
off
(C°lde0
0
_°rmer_
(COlder_
0
_0rm_
9 is Coldest
9 is Coldest
® ®
Adjust Freezer
Adjust Refrigerator
Temperoture
Tempereture
2O
REMOVE PACKAGING, START
ICEMAKER (icemoker models}
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C} Place half width basket onto drawer slides.
See About the freezer section for instructions.
Set the icemaker power switch to the I (on} position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C) or
below. It will then begin operation automaticallg. It
will take 2-3 dags to fill the ice bin.
NOTE: In lower water pressure conditions,
the
water valve mag turn on up to 3 times to
deliver enough water to the icemaker.
Publicidad
