Publicidad
Idiomas disponibles
Idiomas disponibles
Installations (continued)
3. (A) Next insert the expansion bolt into the drilled hole. Make sure it is flush to the floor.
(B) Unscrew the nut, washer and lock ring from the screw.
4. Next, align the bracket hole with the screw and reattach the washer and lock ring. Finally, tighten the nut with
a wrench or socket to the maximum. As you tighten the shield, it will bend outwards, creating an anchor that
provides extra security for your unit.
5. Push the appliance back into its place, Ensure that the bottom of the opening slides under the bracket, as shown
in the example below.
If the unit is not stable, pull back the appliance and repeat the previous step until the unit is stable.
NOTE: IF THE UNIT IS RELOCATED, THE BRACKET MUST BE REMOVED AND RE-INSTALLED TO ITS NEW LOCATION.
Installing The Handle
1. Locate the handle over the pins on the door panel.
2. Fix the handle by tighten the screw.
B
A
14
Publicidad
